close
close

How Do I Read My Liberty 100 Electric Meter

How Do I Read My Liberty 100 Electric Meter. Electricity readings end with a ‘kwh’, though the rule of ignoring the numbers after the decimal place still applies. Alternatively, for information about how s2 meters communicate, please see this guide what do the buttons on the meter keypad do?

How To Take An Eon Meter Reading Joseph Franco's Reading
How To Take An Eon Meter Reading Joseph Franco's Reading from h0ll1emomo.blogspot.com

I have a secure liberty 100 smart meter which was in situ when i moved into the property. On electricity meters, do not write down any numbers from the following if your meter has them: Liberty 100 has modular architecture for both wan/han enabling multiple communications options to be deployed.

Liberty Eg4V 10/11/15 Is Based On A Proven G4 Measurement Unit With Electronic Index And Isolation Valve.

Reading your smart electricity meter. I have a secure liberty 100 smart meter which was in situ when i moved into the property. This is your read, so for this example your reading would be 369kwh.

The Meter Uses Zigbee ® Radio To Provide Link With Head End System And In Home Display (Ihd) Via The Smart Meter Communications Hub.

To get your readings, press ‘6’ on your. The large dial, the dial marked 100 or any red dials. You’ll then see 8 digits (e.g.

Liberty 100 Supports Both Credit And Pay As You Go (Payg) Modes Of Operation.

Do not let the direction of the numbers on each dial confuse you. Have a look at the display panel on your smart meter, normally it'll be blank.press button 'a' or 'b' to wake the screen up.press button 'a' again to show the meter reading and make a note of the numbers including any zeros. There's no need to note down any number(s) after the decimal.

Alternatively, For Information About How S2 Meters Communicate, Please See This Guide What Do The Buttons On The Meter Keypad Do?

You’ll see ‘imp kwh’, followed by the reading itself in kwh. This guide is about s1 secure liberty 100/110 smart meters. Problems reading secure liberty 100 smart meter.

You’ll See 8 Digits (E.g.

On electricity meters, do not write down any numbers from the following if your meter has them: Secure liberty 100 (smets1) to get a reading from this smart meter: Liberty 100 has modular architecture for both wan/han enabling multiple communications options to be deployed.

Leave a Reply

Your email address will not be published.